Wednesday, March 19, 2014

Sandblasting Protective Film For Glass Engraving

Sandblasting Protective Film For Glass Engraving
PVC Sandblasting Protective Film For Glass
02 PVC Sandblasting Protective Film For Glass Carving

03 PVC Sandblasting Protective Film For Glass Carving

Sandblasting Protective Film For Glass Carving
Structure: PVC film + Glue + Paper liner
0.08mm White
0.16mm Yellow
0.25mm Green

UCOLIN Sandblasting Protective Film is made from polyvinyl chloride as backing material, and coated with rubber pressure-sensitive adhesive.

Owning excellent insulation, good viscosity, high-tensile, burn-resistance, cold-resistance excellent properties, makes UCOLIN Sandblasting Protective Film suitable for sand blasting, glass engraving, the light spraying, deep carving, stone carving, tile carving, etc.

How do it work?
• The required design is traced out on the PVC.
• The area to be sandblasted is cut and removed.
• The exposed areas are sandblasted.
• The remaining film is removed from the glass surface.

Technical Datasheet:
Peel Strength 3.5-8.0N/cm
Tensile Strength 16-28N/cm
Temperature 4-80°C
Elongation 160%


UCOLIN GLASS SUPPORT