Tuesday, July 24, 2012

Glass cleaning and requirement Before laminating with PVB FILM POLYVINYL BUTYRAL

Glass cleaning and requirement
Purpose:
Erase any oil or dust on the glass surface
Enhance adhesion capacity

Basic condition and requirement:
Clean the glass. City-water is available
Rinse the glass with treated water only.
Water quality requirement: <30 uS or >1M Ω,Hardness <10ppm,Water
temperature 40-60℃
The glass must be dried completely. Both hot wind and cold wind are
workable, but the wind should be filtered first so as to prevent
contamination.

All Rights Reserved By:
UCOLIN SILICONE TECH
(1)-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy
Glass Laminating
(2)-Silicone Sheet for EVA Glass Laminating Machine
(3)-Silicone Bag for PVB Glass Laminating Auto-clave
(4)-Silicone Rubber Sheet for Solar Cell Module Laminating Machine
(5)-Silicone Sheet for Wood Door Vacuum Laminating Machine Vacuum
Press Machine Vacuum Filming Machine
Contact Us: uc@ucolin.com / www.ucolin.com
umewe360@gmail.com/ umewe360@hotmail.com